Adsl Modem Makronet

Makronet

Default IP: 192.168.1.1

Default username : admin

Default password : admin



Setting Bridge

1. Click Advanced Setup

2. Click WAN

3. Click Add

4. ATM PVC Configuration, PORT=0, VPI=8; VCI=81, Service Category: UBR Without PCR, Next

5. Connection Type Bridging, Encapsulation Mode LLC/SNAP-BRIDGING, Next

6. Centang Enable Bridge Service, Service Name: Speedy, Next

7. WAN Setup - Summary, Save

8. Save/Reboot



Setting PPPoE/Router

1. Click Advanced Setup

2. Click WAN

3. Click Add

4. ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next

5. Connection Type PPP over Ethernet (PPPoE), Encapsulation Mode LLC/SNAP-BRIDGING, Next

6. Put your PPP Username: (nmrspeedy@telkom.net); PPP Password: (password from provider); PPPoE Service Name: Speedy, Cheklist Enable Fullcone NAT, Cheklist Bridge PPPoE Frames Between WAN and Local Ports (Default Enabled), Next

7. cheklist Enable WAN Service, Service Name: Speedy, Next

8. WAN Setup - Summary, Save

9. Save/Reboot